Reliance Steel

Our Family of Companies

The exact type of metal, metal form, or metal processing you are searching for can be sourced through the more than 75 brands that make up the Reliance Family of Companies. Our network of over 300 locations in 40 states and 13 countries outside the U.S. allows us to provide the highest level of customer service, which means getting the right product to you, right on time. Click on a logo to find out more about each company.

All Metal Services

All Metal Services

AMS was founded in 1974 in London, England. Over the past four decades the company has grown to five locations across the United Kingdom, with international presence in France, Malaysia, China, and India. This strategic network of service centers supports customers in over 40 countries worldwide. Today, AMS is the world’s largest raw material service provider to the aerospace and defense industries. AMS offers a broad range of aerospace metals including aluminum, steel, titanium, nickel alloys, and aluminum bronze. The company also provides cut to length, plastic coating, machining, and bar, waterjet, and tube cutting services. AMS and its reputation as a well-established and trusted supplier is a welcome addition to the Reliance Family of Companies, which it joined in August 2014.

All Metals Processing and Logistics, Inc.

All Metals Processing and Logistics, Inc.

Reliance’s acquisition of All Metals, in November 2018, included All Metals Processing & Logistics, Inc. (AMPL) and All Metals Transportation and Logistics, Inc. (AMTL). AMPL is a toll processing specialist, serving the automotive, construction, appliance, and other diverse end markets from its headquarters in Spartanburg, South Carolina and an additional location in Cartersville, Georgia. AMTL provides value-added transportation and logistics for metals products. It operates a fleet of more than 100 trucks from six strategically located terminals throughout the southeastern United States.

Allegheny Steel Distributors, Inc.

Allegheny Steel Distributors, Inc.

Allegheny Steel Distributors, Inc. was founded in 1972 and is a diversified metals processor specializing in prime and non-prime hot rolled carbon steel sheet and coil. Joining the Reliance family of companies in 1999, the company now occupies over 100,000 square feet on nine acres in Indianola, 10 miles northeast of Pittsburgh, Pennsylvania. Its customer base serves most major markets including: containers, recreational vehicles, service centers, tanks, job shops, buildings, fence posts, agriculture, lasers, furnaces, batteries, trailers, material handling equipment, rail and racks/conveyors.

American Metals Corporation

American Metals Corporation

American Steel joined Reliance in July 1995, followed by American Metals in 1998. In 2009, they merged to form American Metals Corporation. The company is a diversified metals processor and distributor based in Canby, OR, with branches in Kent, WA, and Sacramento, Redding, and Fresno, CA. Its metals processing products include plate and plate coil, hot and cold-rolled sheet and coil, coated sheet and coil, angles, channels, beams, hot-rolled carbon bars, alloy bars, tubing and piping, expanded metal and gratings and aluminum and stainless steel. American Metals Corporation’s values of trust, respect, honesty, and tolerance provide a foundation for the ways it improves internal structures, processes, and methods to provide customers with excellent products and quality service. The company also operates a subsidiary, Lampros Steel, Inc., in Portland, OR and LSI Plate (a joint venture with Lampros) in Rancho Cucamonga, CA. In November 2013, it acquired Haskins Steel Co., Inc., of Spokane, WA, a carbon steel and aluminum processing center which strengthens American Metals’ presence in the Pacific Northwest.

All Metals, Inc

AMI Metals, Inc.

Founded in 1983 in Brentwood, Tennessee, AMI Metals, Inc. is now the premier full service metal service center providing aluminum plate, sheet, bar, and extruded profiles for the aerospace industry. AMI joined the Reliance family in 1997 and has expanded to six metals service centers across the nation, with international offices in Belgium, France, and the United Kingdom. A commitment to internal investments, along with management collaboration and communication across all locations, consistently realizes corporate best practices and gives AMI the flexibility to meet short-notice scheduling, minimizing overall cost impacts. AMI’s best-in-class IT customer interface ensures timely delivery of all products and services.

Best Manufacturing, Inc.

Best Manufacturing, Inc.

Best Manufacturing, Inc., joined the Reliance Family of Companies in April 2016. Founded in 1990 and headquartered in Jonesboro, Arkansas, Best is a direct and toll fabricator of steel and aluminum products primarily serving the trucking, agriculture, and energy end markets. In addition to performing laser cutting, shearing, CNC punching, forming, and rolling, Best provides value-added services such as welding, assembly, painting, and inventory management. From engineering prototypes through welded assembly, Best is a one-stop-shop for custom sheet metal fabrication.

Bralco Metals

Bralco Metals

Bralco Metals, a division of Reliance since 1977, is a leader in aerospace, aircraft and industrial metal products, meeting customers’ needs with unbridled quality standards and service. Headquartered in a 140,000 square-foot high-tech metal processing and distribution center in La Mirada, CA, with additional centers in Kent, WA, Garland, TX, Wichita, KS, Albuquerque, NM, and Phoenix, AZ, Bralco Metals offers pre-production precision processing including leveling, blanking, cut-to-length, slitting, sawing, shearing, grinding and machining.

For over six decades, Bralco Metals has provided immediate delivery of ferrous and non-ferrous materials from a vast inventory of aluminum, brass, copper, bronze, beryllium, and stainless steel. Products include coil, sheet, strip, plate, rod and bar. Trained product specialists work with customers to meet any metal requirements. In July 2012, Bralco acquired Airport Metals, a stocking distributor of aircraft materials and supplies. Based in Melbourne, Airport Metals represents Reliance’s first presence in Australia. In October 2013, Affiliated Metals, a fellow Reliance division, joined the Bralco group of companies to expand the company’s presence in Salt Lake City and the Intermountain region.

CCC Steel, Inc.
CCC Steel, Inc.
Phone: (310) 637-0111

CCC Steel, Inc.

CCC Steel, Inc. is a metals distributor based in Rancho Dominguez, California, whose unique policy is to sell steel in original mill bundles or, in some cases, by the piece without further processing. CCC’s stock of carbon steel bars, structurals, plate, pipe and tubing totals over 3,000 items. CCC houses infrequently produced, hard-to-find items, benefiting customers who need such items but not in stringent minimum mill quantities. Facilities in Los Angeles, California and Salt Lake City, Utah and a distribution center in Chicago, Illinois serve the entire western United States. Joining the Reliance family in 1996 has given CCC greater leverage to maintain its distinctive stock and services.

HideView more information about CCC Steel, Inc.

CCC Steel, Inc. is a unique metals distributor based in Rancho Dominguez, California. CCC Steel, Inc. is a wholly owned subsidiary of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States.

“The Steel Distributor For The Mill Buyer”

CCC Steel, has developed a unique merchandising policy among steel distributors which is to sell steel only in original mill bundles, or in some products by the piece, without further processing. This allows us to eliminate the redundant costs associated with special handling, scrap loss, processing equipment and processing labor.

Our large facilities in Los Angeles and Salt Lake City and distribution center in Chicago, allow us to serve the entire Western United States. As a depot for virtually all of your steel needs from our product line, we can free your capital and warehouse space, enabling you to service your customers more efficiently and profitably.

“If We Don’t Carry It, It Probably Isn’t Made”

To fulfill the needs of our customers, we maintain a current and on-order inventory in excess of twenty five thousand tons. That inventory consists of carbon steel bars, structurals, plate, pipe and tubing and totals over three thousand items. We maintain a very in-depth size range for each product group. In addition, some of our inventory is committed to those hard-to-find items that are infrequently produced and slow moving products that our customers have chosen not to stock for good reasons. This has proven beneficial for those customers who need those items but don’t meet the stringent minimum mill quantities. After all, it makes much more sense to maintain a small bundle of infrequently used items on your floor than 20 tons and it costs a great deal less. Many of those items require lead times that are, in some cases six to eight months, clearly making us a logical solution.

Contact a CCC Steel representative and let us show you how we can save you time and money, allowing you to focus on what you do best.

          

Click here to pay your bill

Terms & Conditions of Sale

Purchase Order Terms and Conditions

Central Plains Steel Co.

Central Plains Steel Co.

Anchored by roots in the steel industry dating back to the 1880s, Central Plains Steel Co. opened its Wichita, Kansas plant in 1982 to serve OEMs and other end users throughout the Midwest region. Central Plains is a full-line steel service center processing carbon and alloy steels. Its capabilities include slitting, cut-to-length, flame and plasma cutting, custom roll forming, along with other first step processing and just-in-time delivery. CPS joined the Reliance family in 2002, and continues to pair state-of-the-art equipment with unmatched dedication to quality in order to provide the exact metals that customers need, when they need it.

Chapel Steel Corp.

Chapel Steel Corp.

Chapel Steel specializes in the wholesale distribution and processing of structural, carbon, alloy, abrasion resistant, marine and offshore, pressure vessel quality (PVQ), and armor grades of steel plate. With over 45 years of industry-leading experience, Chapel Steel takes pride in its ability to understand customers’ needs and provide effective solutions with the fastest lead times in the industry. Chapel performs processing services including plasma and oxy-fuel cutting, beveling, drilling, tapping, milling, counter boring, plasma etching, custom forming, and shot blasting; its eight locations create a strategic distribution channel across North America. With an ISO 9001 2015 certification, Chapel Steel assures quality products and complete customer satisfaction. It has been a member of the Reliance Family of Companies since July 2005.

Chatham Steel Corporation

Chatham Steel Corporation

From its beginning in 1915 as a scrap iron and metal business in Savannah, Georgia, Chatham Steel Corporation has grown to become a major steel service leader for over 2,500 active customers. A family business for more than 80 years, Chatham became part of the Reliance family in 1998, further enhancing its ability to anticipate and meet its customers’ needs. Chatham now operates five divisions located in Savannah; Columbia, South Carolina; Orlando, Florida; Birmingham, Alabama; and Durham, North Carolina. Operations were expanded in 2008 to serve the nuclear industry, and Chatham continues to make internal improvements in order to respond quickly and accurately to customers’ requirements.

Clayton Metals, Inc.

Clayton Metals, Inc.

Founded in 1976, Clayton Metals, Inc. processes and distributes slit coils and aluminum circles, which are used in industrial and commercial applications including transportation, electronics, lighting, and housewares. Whether customers need materials for stamping, roll forming, spinning, hydroforming or deep drawing, Clayton Metals works hard to understand and meet their specific needs. Customers come back because of the excellent service and quality of stainless, aluminum, copper and brass products. Clayton Metals, headquartered near Chicago, Illinois, became part of the Reliance family in 2007 and operates two additional locations near Los Angeles, California and Newark, New Jersey.

Continental Alloys & Services, Inc.

Continental Alloys & Services, Inc.

Continental Alloys & Services, Inc. was established in 1976 as a small supplier of steel to the oil and gas industry. By developing its network of relationships and broadening its product lines from oil country tubular goods (OCTG) to mechanical tubing and solid bar, Continental grew its business and service area to Canada, Mexico, the United Kingdom, Malaysia, Singapore, and the United Arab Emirates. Joining the Reliance family in 2011, Continental increased Reliance’s global reach, while at the same time lending Reliance's strength and reputation to Continental’s operations in North America. Continental’s mission remains: to be the global leader in materials management for the energy services industry, offering a complete range of products and value added services that meet or exceed customers’ demands.

Crest Steel Corporation

Crest Steel Corporation

Founded in 1963, Crest Steel Corporation is a major distributor of structural steel products – steel beam, shapes, bar, plate, sheet, steel coil, and more – to industries including shipbuilding, solar support structures and commercial fabrication. Crest offers a variety of value-added processing services, efficiently serving customers from locations in Cypress and Riverside, California and Phoenix, Arizona. Crest joined Reliance’s family of companies in early 2007. Among other new opportunities, the combination with Reliance expanded Crest’s access to inventory and geographic reach, providing a solid footing in the steel plate distribution business.

Delta Steel, Inc.

Delta Steel, Inc.

Founded in 1963, Delta Steel, Inc. has established a deep and diverse inventory, the best processing equipment in the industry and a dedicated, professional team. Experts at brokering partnerships with a diverse group of fabricators, OEMs, and other clients, Delta is a leading provider of steel and pre-production processing in the Southwest. Delta serves various industries domestically and abroad. Joining the Reliance family in 2008 increased Delta’s purchasing strength with steel mills and strong vendor relationships, further enabling Delta to provide the best products at the best prices to clients and customers.

Diamond Manufacturing Company

Diamond Manufacturing Company

Diamond Manufacturing Company has provided OEMs, job shops, and architectural firms with quality perforated metal, plastic, and other materials since 1915. Headquartered in Wyoming, Pennsylvania, with additional locations in Cedar Hill, Texas, Michigan City, Indiana and Charlotte, North Carolina, Diamond became a part of the Reliance family in 2010. With the ability to perforate more than 2000 patterns, produce tolerances tighter than industry standard, and offer sheet, coil, tube, fabricated, or finished product, Diamond has the versatility to meet the needs of all its customers. In 2012, Diamond acquired McKey Perforating Co., Inc. which added two locations in New Berlin, Wisconsin and Manchester, Tennessee. Its capabilities and distinct responsiveness have made Diamond North America's leading and largest perforator. Diamond Manufacturing has provided original equipment manufacturers (OEMs), job shops, and architectural firms with quality perforated metal, plastic, and other materials since 1915; it became a part of the Reliance family in October 2010. With the ability to perforate more than 2000 patterns, produce tolerances tighter than industry standard, and offer sheet, coil, tube, fabricated, or finished product, Diamond has the versatility to meet the needs of all its customers. Diamond’s experts work to ensure complete customer satisfaction: providing design assistance or delivery information, organizing a bar-coded inventory system, or delivering directly to a construction site. Its capabilities and distinct responsiveness have made Diamond North America's leading and largest perforator.

DuBose National Energy Services, Inc.

DuBose National Energy Services, Inc.

Founded in 1990, DuBose National Energy Services offers the largest, most diverse inventory of nuclear certified and safety-related materials and services in the United States. Over the years, DuBose has grown its fabrication capabilities to ensure quality and allowing the company to provide better solutions for its customers. DuBose Energy now operates in over 200,000 square feet in Clinton, North Carolina. Its affiliate company, DuBose National Energy Fasteners & Machined Parts, Inc. has highly skilled machinists and precision equipment on hand to support 24/7/365 global fabrication, supply, and distribution of metal and metal products to the nuclear industry. DuBose Fasteners was founded in 2010 and is headquartered in Cleveland, Ohio. Both companies were acquired by Reliance in March 2018.

Durrett Sheppard Steel Co.

Durrett Sheppard Steel Co.

Founded in 1963 and a Reliance family member since 1998, Durrett Sheppard Steel is a diversified metals processor and distributor based in Baltimore, MD, whose processing capabilities include oxy and plasma burning, sawing and shearing from a 202,000 square-foot facility. Durrett Sheppard outsources a variety of other metal products and related processing requirements and delivers metal products to customers throughout Maryland, Delaware, Pennsylvania, Virginia, West Virginia and Washington, D.C. Durrett Sheppard prides itself in quality, service and dedication to serving its customers' needs.

Earle M. Jorgensen Company

Earle M. Jorgensen Company

Earle M. Jorgensen Company was founded as Jorgensen Steel and Aluminum in 1921 and quickly rose to be one of the country's largest stockers of bar, sheet, plate, tubing, and structural steel and aluminum, and a leading supplier to manufacturing companies across North America. A broad network of facilities, superior inventories, processing capabilities, and world-class technology enables them to provide unsurpassed service to their customers. Acquired by Reliance in 2006, EMJ’s 30+ U.S. locations and presence in Canada and Malaysia represent one of Reliance’s largest subsidiaries.

Encore Metals

Encore Metals

With locations in Vancouver, Edmonton, Calgary, and Winnipeg, Encore Metals – supplies specialist high grade steel and metals. These include carbon and alloy steels, stainless steels, nickel alloys, iron bar, aluminum and bronze. Encore’s processing capabilities include bar sawing, trepanning, stainless plate profiling and plate sawing. With roots dating back to 1892, Encore Metals has not only seen but been a major player in the growth and development of the metals service center industry in Canada. The company strives to live by its mission statement to “provide superior service and the highest quality products to our customers while maintaining a safe work environment for all employees, contractors, and visitors.” Encore Metals joined the Reliance family of companies in 2007.

FastMetals

FastMetals, Inc.

Launched in February 2020, FastMetals is an e-commerce business created in response to the growing demand for digital purchasing solutions from metalworkers of all backgrounds. FastMetals tailors to smaller, specialized end-users including artists, fabricators, machine shops, hobbyists, and do-it-yourself practitioners. Customers can choose from standard shapes and sizes or select specific dimensions to satisfy unique project requirements. FastMetals provides instant pricing, same-day shipping, no minimum order quantity, and direct fulfillment to the individual customer. It is yet another channel through which customers can experience Reliance’s unique, customer-focused service.

Feralloy Corporation

Feralloy Corporation

One of the country’s largest high-volume steel processing companies, Feralloy Corporation delivers quality processed flat rolled steel. From its Chicago base, Feralloy operates a network of five coil processing plants and seven joint venture facilities throughout the U.S. and Mexico that provide value-added processing of hot rolled, pickled, cold rolled and coated sheet products to manufacturers and producers. Feralloy has almost 60 years of industry experience and joined Reliance’s family of companies in 2008.

Fox Metals and Alloys, Inc.

Fox Metals and Alloys, Inc.

Started in Houston in 1985, Fox Metals & Alloys specializes in alloy, carbon, and stainless steel bar and plate products. Its processing capabilities include saw cutting, plate burning, and testing. Fox supplies OEMs and machine shops that support the oil and gas and petrochemical industries, in which timeliness is critical. The company prides itself on its customer-centered practices: understanding each customer’s unique needs and delivering efficient and cost-effective solutions. With its fleet of eight delivery trucks, its strong reputation for delivering custom products and solutions, and unparalleled quality and customer service, Fox a trusted supplier serving serve Texas, Oklahoma, and Louisiana. Fox Metals joined the Reliance Family of Companies in December 2014.

Fry Steel Company
Fry Steel Company View Fry Steel Company Website
Phone: (562) 802-2721

Fry Steel Company

Founded in 1948 as the Allen-Fry Steel Company, the company’s name changed when John Fry bought out his business partner in 1971. Today, Fry Steel is an established and ISO 9001/AS9120 certified general line and long bar distributor. The company operates from an 180,000 square foot warehouse located in Santa Fe Springs, California. Fry Steel performs cutting services on its diverse product assortment of over 8,000 types and conditions of long bar product and provides next business day delivery on in-stock items through its proprietary fleet of trucks. The company prides itself as a “source of service” for all grades of bar metal. Fry Steel joined the Reliance Family of Companies on December 31, 2019.

Infra-Metals Co.

Infra-Metals Co.

Infra-Metals has built strong relationships with major vendors in the U.S. and globally. Beyond stock, Infra-Metals offers a broad array of services, tailored to meet local customers’ specific needs. Each Infra-Metals location has a commitment to saw cutting, beam splitting, cambering, punching, plate burning, and prompt delivery. Infra-Metals has been a Reliance subsidiary since 2008. Its deep and unique inventory often carries sections unavailable elsewhere. Constantly in the market purchasing steel has built strong relationships with major vendors in the U.S. and globally. Beyond stock, Infra-Metals offers a broad array of services, tailored to meet local customers’ specific needs. Each Infra-Metals location has a commitment to: saw cutting, beam splitting, cambering, punching, plate burning, and prompt delivery. As a Reliance subsidiary since August 2008, Infra-Metals has secure financing and a strengthened commitment to steel distribution and processing.

The KMS Companies
The KMS Companies View The KMS Companies Website
Phone: (570) 338-0200

The KMS Companies

KMS Fab, LLC was founded in 1954 in Luzerne, Pennsylvania, with just two employees. KMS South, Inc. was founded in 1987 in West Columbia, South Carolina. The KMS Companies now employ a team of over 200 employees and net over 250,000 square feet in plants and factories. KMS’ specialty is precision sheet metal fabrication of products ranging from prototypes to large production runs. The KMS Companies also produce zinc plating, welded mechanical and electro-mechanical assemblies, and stainless steel parts. They offer a wide variety of metals and fabrication methods, including laser cutting, stamping, turret punching, automation, machining, powder coating, e-coating, silk screening, anodizing, and welding. KMS joined the Reliance Family of Companies in 2018.

Liebovich Bros., Inc.

Liebovich Bros., Inc.

Liebovich Bros., Inc.'s state-of-the-art facilities in Rockford, Illinois, are fully equipped to provide high-definition plasma cutting, precision plate and sheet shearing, flame cutting, grinding, stress relieving and saw cutting, among other services. Their inventory of aluminum, hot and cold rolled steel, stainless steel, brass, copper and alloys is among the Midwest's largest. Whether customers need a single piece or 1,000 pieces cut, Liebovich is able to fill the order quickly and efficiently. The company continues investing in the latest technology and equipment and strives to improve its products and services. Liebovich has been part of the Reliance family since 1999. It also operates Liebovich Steel & Aluminum Company, Good Metals Company, Hagerty Steel & Aluminum Company, and Custom Fab Company.

MetalCenter Inc.
MetalCenter Inc.
Phone: (562) 944-3322

MetalCenter

MetalCenter is a metals processor and distributor of commercial aluminum, aerospace aluminum, and stainless steel. This Reliance division traces its roots back to 1980, when the non-ferrous operations of Reliance Steel Company were relocated from Los Angeles to Cerritos, California and renamed Reliance MetalCenter. In 1986, the name was shortened to MetalCenter, and in 1990 the company moved to a state-of-the-art 142,000 square-foot facility in Santa Fe Springs, California, absorbing the operations of Eureka Metals when it was acquired by Reliance in 1993. Today, MetalCenter is widely recognized as a leader in aluminum and stainless, whose diverse product range, processing capabilities, and superior quality are unmatched in this segment of the metals industry.

HideView more information about MetalCenter

MetalCenter is a metals processor and distributor of commercial aluminum, aerospace aluminum and stainless steel located in the Southern California area. MetalCenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), one of the largest metals service center companies in the United States, and is an ISO 9001:2015 (view document) certified facility.

MetalCenter – History

The roots of MetalCenter were founded in 1980, when the non-ferrous operations of the Reliance Steel Company were moved to Cerritos, California and called Reliance MetalCenter. At the time, the 75,000 square foot facility had just one leveling line and one shear. The division specialized in just commercial aluminum and stainless flat-rolled products. In 1981 Reliance Steel & Aluminum Co. made two acquisitions that were combined with Reliance MetalCenter – Cerritos. The first was West Metals in 1981 and the second was Circle Metals in 1983. The combination of these companies gave Reliance MetalCenter – Cerritos additional depth, increased the customer base and added leveling capacity, as well as an entry into the slitting business. By 1984 sales for Reliance MetalCenter – Cerritos had doubled. In 1986 the company name changed to MetalCenter and in 1990 the division moved to a state-of-the-art 142,000 square foot facility in Santa Fe Springs, California. Then in 1993 Eureka Metals was acquired which specialized in aerospace aluminum products.

MetalCenter – Today

Today, this division is widely recognized as a leader in the aluminum and stainless product arena. Its diverse product depth, processing capabilities and superior quality are unmatched in this metals segment of the industry.

Sales Terms and Conditions
Purchase Terms and Conditions

Metals USA, Inc.

Metals USA

Metals USA, Inc. is a national network of over 45 metals service centers providing processed carbon steel, stainless steel, aluminum, red metals, and manufactured metal components to a wide range of industries including land and marine transportation, energy, aerospace, defense, appliance manufacturing, furniture, commercial construction, machinery and equipment, and residential remodeling. Metals USA performs such value-added processes as cutting, sawing, punching, shot blasting, surface grinding, and drilling for delivery to customers in the U.S., Canada, and Mexico. In early 2013, Metals USA joined the Reliance family of companies as a wholly-owned subsidiary and Reliance’s largest acquisition to date.

Metalweb Limited

Metalweb Limited

Metalweb Limited, established in 2001, provides comprehensive metals services to hi-tech industries, carrying out four key roles in the supply chain that help its customers perform more cost-effectively: holding stock; carrying out first stage processing; having no minimum quantity; and maintaining traceability. Metalweb– headquartered in Birmingham, with additional locations in London, Manchester, and Oxford, England – stocks one of the largest ranges of aluminum products in all alloys, including plate, sheet, bar, tube and other extruded products. Fully-trained technicians operate specialist plate saws, bar saws, a large bed waterjet cutter, and other precision processing equipment. Metalweb became a part of Reliance’s family of companies in 2007.

National Specialty Alloys, Inc.

National Specialty Alloys, Inc.

Since 1985, National Specialty Alloys, Inc. has been the supplier of choice of premium stainless steel, nickel, high temperature and specialty alloy bars and other shapes. With its experience, range of capabilities, accurate processing, same-day shipping, and much more, NSA is proud to be a single-source solution. Four strategic warehouse locations in Texas, California, Georgia and Oklahoma serve both domestic and international markets, with inventory, tracking, and expediting done electronically, in real time. This saves customers’ time, space, and money. With their in-depth product knowledge and extensive cross-training, the NSA sales and support teams are motivated to deliver fast, accurate information. Final inspection of every order and same-day shipping complete their customer commitment. NSA joined the Reliance family in 2012.

Northern Illinois Steel Supply Company

Northern Illinois Steel Supply Company

Northern Illinois Steel, located in Channahon, Illinois, has been serving the needs of Illinois- and Indiana-based customers since 1961. NIS is a complete metalworks fabricating company, producing parts and products in aluminum, brass, copper, and stainless steel products in all grades, shapes, and sizes. The company’s 80,000 square foot warehouse and fabrication facilities are fully stocked with thousands of tons of plate, sheet, structural, bars, tubing, grating, and more. State-of-the-art processing equipment and a computerized inventory system, combined with skilled, knowledgeable, and dedicated staff – including drivers to operate a large fleet of delivery vehicles – mean that NIS can safely and efficiently process orders and offer “just in time” delivery, oftentimes on the same or the next day. NIS became a part of Reliance’s Family of Companies in August 2014.

Pacific Metal Company

Pacific Metal Company

Since 1876, with a firm belief that solid relationships and a strong commitment to quality and service are the backbone of good business, Pacific Metal Company has always put customers first. Headquartered in Tualatin, Oregon, with five additional locations in Seattle and Spokane, Washington; Boise, Idaho; Eugene, Oregon; and Billings, Montana, Pacific Metal serves the west, from Alaska to California’s Sacramento Valley to the eastern plains of Montana and Wyoming. From a diverse standard stock list to customer-specific inventories, customized just-in-time programs, and pre-production processing, Pacific Metal has worked hard to form mutually profitable business partnerships with all of its customers. Pacific Metal became part of the Reliance family in 2002. Its 135+ year history continues to be one of growth and adaptation to changing customer needs.

PDM Steel Service Centers, Inc.

PDM Steel Service Centers, Inc.

PDM Steel Service Centers, Inc. began in 1954 with four service centers – in Fresno, Sacramento, San Jose, and Stockton, California – providing outstanding metal processing and delivery throughout Central and Northern California. By improving existing centers, building new ones, and continuing to expand into new areas, the company grew to nine locations with corporate headquarters in Stockton, California. PDM now serves the Southwest desert region of the United States into southwestern Canada and Alaska. Every PDM location has shears, automatic saws, and shape burning equipment, and its own modern fleet of trucks. Some centers also offer plasma cutting, computer aided design, and CNC. PDM’s range of services and reputation for excellent customer service made it a good fit for Reliance, who acquired PDM in 2001.

Phoenix Metals Company

Phoenix Metals Company

Founded in 1979, Phoenix Metals Company specializes in flat-rolled aluminum and stainless steel and coated carbon steel product. Phoenix creates a bridge between primary metal producers and consumers which enables them to custom fit orders, making it a one-stop depot for all its customers’ metal service needs. Phoenix Metals uses its state-of-the-art processing equipment to provide cut-to-length/blanking, slitting, shearing, plasma burning and polishing services. Headquartered near Atlanta, Georgia, Phoenix has grown to 13 locations in Alabama, Arkansas, Florida, Georgia, Indiana, Kansas, Louisiana, Missouri, North Carolina, Ohio, Pennsylvania, Tennessee and Virginia.

Precision Flamecutting and Steel, Inc.

Precision Flamecutting and Steel, Inc.

In business since 1975 and acquired by Reliance in 2008, Precision Flamecutting and Steel, Inc. is an industry leader in flame cutting and plasma cutting carbon plate, alloy plate, and HSLA steel plate – so much so that competitors recommend Precision Flamecutting for especially difficult jobs. Beveling, machining, rolling, forming (including concentric and eccentric cones), heat treating, sandblasting, coating, grinding, and other miscellaneous machining and fabricating services are also offered. Precision Flamecutting’s commitment to its customers is to provide parts for their purchase requirements, on time and according to industry specifications. Precision Flamecutting’s sales, drafting and shop personnel are on call 24 hours a day, 365 days a year to serve customers in any and every situation.

Precision Strip, Inc.

Precision Strip, Inc.

Precision Strip, Inc. was founded in 1977 by five partners operating a used slitting line in Minster, Ohio. It is now one of the world's leading processors of rolled steel, aluminum, and copper, with almost 1,200 associates, and 12 facilities – located throughout Ohio, Indiana, Kentucky, Alabama, and Michigan. By providing one of the most diverse arrays of services in the industry, continually improving technologically, and partnering with customers, Precision Strip has earned a reputation for being the world’s premier toll processor. A fleet of approximately 225 tractor-trailers provides just-in-time delivery and ensures seamless service – from storage to processing to delivery – to the automotive, appliance, industrial products, and beverage can industries. Precision Strip has been a part of the Reliance family since 2003.

Reliance Aerospace Solutions

Reliance Aerospace Solutions

Reliance Aerospace Solutions (RAS) was established in 2007 to offer a single point of contact to distribute various aerospace grade products to contract customers and their sub-tier suppliers. Rather than maintaining or controlling any physical inventory, RAS fills orders using approved Reliance subsidiaries and divisions. The objective of RAS is to provide customers with the most comprehensive mix of products available in the industry, on-time and defect-free.

Reliance Metalcenter
Reliance Metalcenter

Reliance Metalcenter

Reliance’s seven Metalcenter divisions are strategically located in Colorado Springs, CO; Arlington (Dallas-Ft. Worth) and San Antonio, TX; National City (San Diego) and Union City (Northern California), CA; Phoenix, AZ; and Salt Lake City, UT. Each independently-operating service center has an established reputation for satisfying customer demand for a wide range of metals products and value-added processing using state-of-the art equipment and shipped for just-in-time delivery. Metalcenters cater to diverse customers including general fabricators, truck trailer manufacturers, precision sheet metal shops, kitchen equipment and structural steel fabricators, sports equipment manufacturers, and the telecommunications, energy, computer chip-making, and aerospace industries. All Metalcenters strive for the highest level of customer satisfaction and quality, drawing on Reliance’s resources to invest in their operations and improve services as their local markets dictate.

HideView more information about Reliance Metalcenter

Arlington

3320 E. Randol Mill Rd., Arlington, TX, 76011 – Tel: 817-640-7222

[email protected]

Reliance Metalcenter is a diversified metals processor and distributor based in Arlington, Texas. Reliance Metalcenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States and is an ISO 9001:2015 (view document) certified facility.

Strategically located in the center of the Dallas-Ft Worth, Texas area, Reliance Metalcenter’s 75,000 square-foot facility is well equipped to service the metal requirements of a diverse customer base. Those customers include general fabricators, truck trailer manufacturers, precision sheet metal shops, sign manufactures, kitchen equipment fabricators, display rack manufacturers, structural steel fabricators, sports equipment manufacturers, machine shops, the telecommunications industry, and the energy industry, to name a few. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

San Antonio

5027 Space Center, San Antonio, TX, 78218-5729 – Tel: 210-661-2301

[email protected]

Reliance Metalcenter is a diversified metals processor and distributor located in San Antonio, Texas. Reliance Metalcenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States, and is an ISO 9001:2015 (view document) certified facility.

Reliance Metalcenter has been serving the metal products needs of the South Texas and Mexico markets since 1971. Our 73,000 square-foot facility has the capability to provide our customers, in various industries, with value-added metal products processed according to customer specifications. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

Click here to pay your bill

Colorado Spring, CO

3855 Silica Drive, Colorado Springs, CO, 80910 – Tel: 719-390-4911

View Website

[email protected]

National City, CA

2100 Cleveland, National City, CA, 91950-6487 – Tel: 619-263-2141

View Website

[email protected]

Phoenix, AZ

301 South 26th St., Phoenix, AZ, 85034-2688 – Tel: 602-275-4471

View Website

[email protected]

Salt Lake City, UT

4355 West 1730 South, Salt Lake City, UT, 84104 – Tel: 801-974-5300

View Website

[email protected]

Union City, CA

33201 Western Avenue, Union City, CA, 94587-2200 – Tel: 510-476-4400

View Website

[email protected]

Reliance Steel Company
Reliance Steel Company

Reliance Steel Company

Reliance Steel Company is New Mexico's largest full-line carbon steel processor and distributor, supplying value-added metals products to customers throughout New Mexico, Southern Colorado and El Paso, Texas. This Reliance division is renowned for its quality "first step" processing capabilities. Reliance Steel Company – Los Angeles still operates on the plot of land purchased in 1952 that was shared with Reliance headquarters, until the corporate office moved to Downtown Los Angeles. Reliance Steel Company now operates from a 275,000 square-foot facility with the capability to process value-added carbon steel products for a diverse customer base throughout Southern California. Reliance Steel Company – Los Angeles prides itself on quality, service and a dedication to serving its customers' needs.

HideView more information about Reliance Steel Company

Albuquerque

1801 Eighth Street N.W., Albuquerque, NM, 87102 – Tel: 505-247-1441

[email protected]

Reliance Steel Company is a diversified metals processor and distributor based in Albuquerque, New Mexico and is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States, and is an ISO 9001:2015 (view document) certified facility.

This division is New Mexico’s largest full-line carbon steel processor and distributor that supply value-added metal products to customers throughout New Mexico, Southern Colorado and El Paso, Texas. The division is renown for its qualitiy “first step” processing capabilities. These services are provided in an effort to assist our customers in reducing costs.

We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

Click here to pay your bill

Los Angeles

2537 E. 27th Street, Los Angeles, CA, 90058 – Tel: 323-583-6111

[email protected]

Reliance Steel Company is a diversified metals processor and distributor based in Los Angeles, California. Reliance Steel Company is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States.

Our 275,000 square-foot facility has the capability for processing value-added carbon steel products to our diverse customer base throughout Southern California. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

The Richardson Trident Company, LLC

The Richardson Trident Company, LLC

The Trident Company was founded in October 1962. Over the past half-century, the business has grown into a multi-faceted metals service center, servicing national customers from its locations in Richardson, Odessa, and Houston, Texas; Tulsa, Oklahoma; and Kansas City, Missouri. Trident distributes non-ferrous metals including aluminum, stainless, as well as specialty performance and corrosion-resistant products. Its processing services include boring, honing, turning, cutting, slitting, sheeting, shearing, and saw operations. Trident was acquired by Reliance in 2014, when it was a subsidiary of Metals USA.

Service Steel Aerospace Corp.

Service Steel Aerospace Corp.

Service Steel Aerospace Corp. was founded in 1976 and is one of the largest aerospace steel and titanium distributors in the world. It stocks a vast selection of aerospace quality steel and titanium, maraging steel and invar steel products for the aerospace and other critical application industries. SSA’s large inventory and mill relationships enable it to offer immediate delivery of hard-to-find products. In addition to providing stock, SSA performs a wide array of value-added processing including forging, custom in-house cutting, heat treating, ultrasonic testing, trepanning, and turning/grinding. Strategic locations in Fife, Washington; Massillon, Ohio; Pico Rivera, California; and Bristol, Connecticut and a team of experienced staff, quickly fill orders and release them for worldwide shipping. SSA has been a part of the Reliance family since 1997. It acquired Dynamic Metals International, LLC located in Bristol, Connecticut, in 2008.

Siskin Steel & Supply Co., Inc.

Siskin Steel & Supply Co., Inc.

In 1900, Robert Siskin and a friend opened a scrap metal business with $6.00 and a rented lot in Chattanooga, Tennessee. Over the course of a century the business has grown to eight locations across Tennessee, Alabama, Georgia, Kentucky and South Carolina, serving most of the southeastern United States. Two partners have increased to hundreds of skilled employees, and the product line has grown beyond standard warehouse carbon steel, stainless, aluminum and other non-ferrous metals to specialty and hard-to-find items. In 1996, Siskin was acquired by Reliance. Subsequent Reliance acquisitions – Georgia Steel Supply Co., East Tennessee Steel Supply Co., Industrial Metal & Surplus, Inc., and Athens Steel, Inc. – were integrated into the Siskin Steel group.

Sugar Steel Corporation

Sugar Steel Corporation

Sugar Steel Corporation, headquartered near Chicago, Illinois has been in business since 1966, meeting customers’ metal needs while providing exceptional service. Sugar Steel prides itself in establishing long lasting customer partnerships built on its ability to save customers both time and money. Beyond supplying stock material, Sugar Steel provides first-stage processing. This service has been the key to the company’s continued growth and success since the very beginning. It has been a part of the Reliance family of companies since 2008.

Team Tube

Team Tube

Team Tube specializes in mechanical steel tubing – including microhoned ID tubing – specifically designed to serve hydraulic and general machine shops. Since 1977, Team Tube’s inventories have grown to include chrome-moly alloy tubing, chrome plated bars, ductile iron bars, Zincaloy tubing and bar, and much more. Customers have also increased to include the original equipment manufacturers (OEM) industry. Team Tube services Canada wide from its 5 locations in Vancouver, Edmonton, Calgary, Toronto and Montreal. Team Tube has been a member of the Reliance family since 2007.

Tube Service Co.

Tube Service Co.

Founded more than three decades ago, Tube Service Co., headquartered in Los Angeles, California, introduced the nation’s first high-tech computerized storage and retrieval systems, and continues to provide tubular laser processing services and distribution throughout the western United States. Tube Service Co. leads the way with three state-of-the-art tube laser processing centers which specialize in cutting stainless, aluminum and carbon tubular shapes. The company distributes a full array of ferrous and non-ferrous tubular products, laser tube processing, cutting to length tube processing, and marketing seamless and drawn over mandrel tubing (aluminum, stainless, carbon, and alloy). Six service centers in California, Arizona, Colorado and Oregon, excellent relationships with most major tube and pipe mills around the world, and a knowledgeable and experienced sales staff makes Tube Service Co. the first choice to meet customers’ tubular product needs.

Tubular Steel, Inc.
Tubular Steel, Inc. View Tubular Steel, Inc. Website
Phone: (314) 851-9200

Tubular Steel, Inc.

Tubular Steel, Inc. (TSI) was founded in 1953 in St. Louis, Missouri. Over the years, TSI has grown its business in terms of products, services, locations, and employees. Today, the company consists of seven service centers across the United States, which stock over 60,000 tons and ship over 2 million custom-cut lengths of pipe, tubing, and bar products annually. In addition to being a leading distributor and processor of carbon, alloy, and stainless steel products, TSI and its team of over 350 employees is dedicated to helping their customers achieve savings through their innovative solutions. The company, along with its subsidiary, Metalcraft Enterprises, Inc., was acquired by Reliance in January 2016.

Valex Corp.

Valex Corp.

Valex Corp. started in 1976 and became part of the Reliance family in 1986. Headquartered in Ventura, California, Valex is the world's leading manufacturer and distributor of ultra-high purity (UHP) products used in gas delivery systems. Its products have been long established as components of choice by semiconductor producers and manufacturers of semiconductor equipment. Ongoing research and development, as well as plant improvements, continually enhance its position as a market leader. Valex Corp. products have acquired a distinguished worldwide reputation by fulfilling customers' requirements for excellent reliability and quality. Valex has two additional locations near Seoul, South Korea and Shanghai, People’s Republic of China.

Viking Materials, Inc.

Viking Materials, Inc.

Viking Materials, Inc. was founded in Minneapolis, Minnesota in 1972. Viking developed into a major metals supplier to the Upper Midwest. It now has an additional location near Chicago, Illinois. In addition to providing the best products available, Viking Materials learned early on that excellent service and creating solutions were the keys to success. This philosophy of evolving with customers’ needs helps the company focus on its vision of being the market’s first choice for metal products. In 2001, Viking Materials joined Reliance’s family of companies.

Yarde Metals, Inc.

Yarde Metals, Inc.

Yarde Metals, Inc. was founded in 1976 in Bristol, Connecticut. Over the years this family company grew to 10 service centers along the East Coast and into the Midwest, serving markets across the United States, Europe and Asia. In 2003, headquarters moved to a completely renovated state-of-the-art 500,000 square-foot facility in Southington, Connecticut. The company joined the Reliance family in 2006 and specializes in aluminum, stainless, carbon steel, brass and copper in a wide range of standard, unique and hard-to-find sizes. It also offers a variety of modern processing services and ensures quick turnarounds and fast deliveries. Yarde’s customers are supported by a team of 600 highly motivated associates.

All Metal Services

All Metal Services

AMS was founded in 1974 in London, England. Over the past four decades the company has grown to five locations across the United Kingdom, with international presence in France, Malaysia, China, and India. This strategic network of service centers supports customers in over 40 countries worldwide. Today, AMS is the world’s largest raw material service provider to the aerospace and defense industries. AMS offers a broad range of aerospace metals including aluminum, steel, titanium, nickel alloys, and aluminum bronze. The company also provides cut to length, plastic coating, machining, and bar, waterjet, and tube cutting services. AMS and its reputation as a well-established and trusted supplier is a welcome addition to the Reliance Family of Companies, which it joined in August 2014.

All Metals Processing and Logistics, Inc.

All Metals Processing and Logistics, Inc.

Reliance’s acquisition of All Metals, in November 2018, included All Metals Processing & Logistics, Inc. (AMPL) and All Metals Transportation and Logistics, Inc. (AMTL). AMPL is a toll processing specialist, serving the automotive, construction, appliance, and other diverse end markets from its headquarters in Spartanburg, South Carolina and an additional location in Cartersville, Georgia. AMTL provides value-added transportation and logistics for metals products. It operates a fleet of more than 100 trucks from six strategically located terminals throughout the southeastern United States.

Allegheny Steel Distributors, Inc.

Allegheny Steel Distributors, Inc.

Allegheny Steel Distributors, Inc. was founded in 1972 and is a diversified metals processor specializing in prime and non-prime hot rolled carbon steel sheet and coil. Joining the Reliance family of companies in 1999, the company now occupies over 100,000 square feet on nine acres in Indianola, 10 miles northeast of Pittsburgh, Pennsylvania. Its customer base serves most major markets including: containers, recreational vehicles, service centers, tanks, job shops, buildings, fence posts, agriculture, lasers, furnaces, batteries, trailers, material handling equipment, rail and racks/conveyors.

American Metals Corporation

American Metals Corporation

American Steel joined Reliance in July 1995, followed by American Metals in 1998. In 2009, they merged to form American Metals Corporation. The company is a diversified metals processor and distributor based in Canby, OR, with branches in Kent, WA, and Sacramento, Redding, and Fresno, CA. Its metals processing products include plate and plate coil, hot and cold-rolled sheet and coil, coated sheet and coil, angles, channels, beams, hot-rolled carbon bars, alloy bars, tubing and piping, expanded metal and gratings and aluminum and stainless steel. American Metals Corporation’s values of trust, respect, honesty, and tolerance provide a foundation for the ways it improves internal structures, processes, and methods to provide customers with excellent products and quality service. The company also operates a subsidiary, Lampros Steel, Inc., in Portland, OR and LSI Plate (a joint venture with Lampros) in Rancho Cucamonga, CA. In November 2013, it acquired Haskins Steel Co., Inc., of Spokane, WA, a carbon steel and aluminum processing center which strengthens American Metals’ presence in the Pacific Northwest.

All Metals, Inc

AMI Metals, Inc.

Founded in 1983 in Brentwood, Tennessee, AMI Metals, Inc. is now the premier full service metal service center providing aluminum plate, sheet, bar, and extruded profiles for the aerospace industry. AMI joined the Reliance family in 1997 and has expanded to six metals service centers across the nation, with international offices in Belgium, France, and the United Kingdom. A commitment to internal investments, along with management collaboration and communication across all locations, consistently realizes corporate best practices and gives AMI the flexibility to meet short-notice scheduling, minimizing overall cost impacts. AMI’s best-in-class IT customer interface ensures timely delivery of all products and services.

Best Manufacturing, Inc.

Best Manufacturing, Inc.

Best Manufacturing, Inc., joined the Reliance Family of Companies in April 2016. Founded in 1990 and headquartered in Jonesboro, Arkansas, Best is a direct and toll fabricator of steel and aluminum products primarily serving the trucking, agriculture, and energy end markets. In addition to performing laser cutting, shearing, CNC punching, forming, and rolling, Best provides value-added services such as welding, assembly, painting, and inventory management. From engineering prototypes through welded assembly, Best is a one-stop-shop for custom sheet metal fabrication.

Bralco Metals

Bralco Metals

Bralco Metals, a division of Reliance since 1977, is a leader in aerospace, aircraft and industrial metal products, meeting customers’ needs with unbridled quality standards and service. Headquartered in a 140,000 square-foot high-tech metal processing and distribution center in La Mirada, CA, with additional centers in Kent, WA, Garland, TX, Wichita, KS, Albuquerque, NM, and Phoenix, AZ, Bralco Metals offers pre-production precision processing including leveling, blanking, cut-to-length, slitting, sawing, shearing, grinding and machining.

For over six decades, Bralco Metals has provided immediate delivery of ferrous and non-ferrous materials from a vast inventory of aluminum, brass, copper, bronze, beryllium, and stainless steel. Products include coil, sheet, strip, plate, rod and bar. Trained product specialists work with customers to meet any metal requirements. In July 2012, Bralco acquired Airport Metals, a stocking distributor of aircraft materials and supplies. Based in Melbourne, Airport Metals represents Reliance’s first presence in Australia. In October 2013, Affiliated Metals, a fellow Reliance division, joined the Bralco group of companies to expand the company’s presence in Salt Lake City and the Intermountain region.

CCC Steel, Inc.

CCC Steel, Inc.

CCC Steel, Inc. is a metals distributor based in Rancho Dominguez, California, whose unique policy is to sell steel in original mill bundles or, in some cases, by the piece without further processing. CCC’s stock of carbon steel bars, structurals, plate, pipe and tubing totals over 3,000 items. CCC houses infrequently produced, hard-to-find items, benefiting customers who need such items but not in stringent minimum mill quantities. Facilities in Los Angeles, California and Salt Lake City, Utah and a distribution center in Chicago, Illinois serve the entire western United States. Joining the Reliance family in 1996 has given CCC greater leverage to maintain its distinctive stock and services.

View more information about CCC Steel, Inc.

CCC Steel, Inc. is a unique metals distributor based in Rancho Dominguez, California. CCC Steel, Inc. is a wholly owned subsidiary of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States.

“The Steel Distributor For The Mill Buyer”

CCC Steel, has developed a unique merchandising policy among steel distributors which is to sell steel only in original mill bundles, or in some products by the piece, without further processing. This allows us to eliminate the redundant costs associated with special handling, scrap loss, processing equipment and processing labor.

Our large facilities in Los Angeles and Salt Lake City and distribution center in Chicago, allow us to serve the entire Western United States. As a depot for virtually all of your steel needs from our product line, we can free your capital and warehouse space, enabling you to service your customers more efficiently and profitably.

“If We Don’t Carry It, It Probably Isn’t Made”

To fulfill the needs of our customers, we maintain a current and on-order inventory in excess of twenty five thousand tons. That inventory consists of carbon steel bars, structurals, plate, pipe and tubing and totals over three thousand items. We maintain a very in-depth size range for each product group. In addition, some of our inventory is committed to those hard-to-find items that are infrequently produced and slow moving products that our customers have chosen not to stock for good reasons. This has proven beneficial for those customers who need those items but don’t meet the stringent minimum mill quantities. After all, it makes much more sense to maintain a small bundle of infrequently used items on your floor than 20 tons and it costs a great deal less. Many of those items require lead times that are, in some cases six to eight months, clearly making us a logical solution.

Contact a CCC Steel representative and let us show you how we can save you time and money, allowing you to focus on what you do best.

          

Click here to pay your bill

Terms & Conditions of Sale

Purchase Order Terms and Conditions

Central Plains Steel Co.

Central Plains Steel Co.

Anchored by roots in the steel industry dating back to the 1880s, Central Plains Steel Co. opened its Wichita, Kansas plant in 1982 to serve OEMs and other end users throughout the Midwest region. Central Plains is a full-line steel service center processing carbon and alloy steels. Its capabilities include slitting, cut-to-length, flame and plasma cutting, custom roll forming, along with other first step processing and just-in-time delivery. CPS joined the Reliance family in 2002, and continues to pair state-of-the-art equipment with unmatched dedication to quality in order to provide the exact metals that customers need, when they need it.

Chapel Steel Corp.

Chapel Steel Corp.

Chapel Steel specializes in the wholesale distribution and processing of structural, carbon, alloy, abrasion resistant, marine and offshore, pressure vessel quality (PVQ), and armor grades of steel plate. With over 45 years of industry-leading experience, Chapel Steel takes pride in its ability to understand customers’ needs and provide effective solutions with the fastest lead times in the industry. Chapel performs processing services including plasma and oxy-fuel cutting, beveling, drilling, tapping, milling, counter boring, plasma etching, custom forming, and shot blasting; its eight locations create a strategic distribution channel across North America. With an ISO 9001 2015 certification, Chapel Steel assures quality products and complete customer satisfaction. It has been a member of the Reliance Family of Companies since July 2005.

Chatham Steel Corporation

Chatham Steel Corporation

From its beginning in 1915 as a scrap iron and metal business in Savannah, Georgia, Chatham Steel Corporation has grown to become a major steel service leader for over 2,500 active customers. A family business for more than 80 years, Chatham became part of the Reliance family in 1998, further enhancing its ability to anticipate and meet its customers’ needs. Chatham now operates five divisions located in Savannah; Columbia, South Carolina; Orlando, Florida; Birmingham, Alabama; and Durham, North Carolina. Operations were expanded in 2008 to serve the nuclear industry, and Chatham continues to make internal improvements in order to respond quickly and accurately to customers’ requirements.

Clayton Metals, Inc.

Clayton Metals, Inc.

Founded in 1976, Clayton Metals, Inc. processes and distributes slit coils and aluminum circles, which are used in industrial and commercial applications including transportation, electronics, lighting, and housewares. Whether customers need materials for stamping, roll forming, spinning, hydroforming or deep drawing, Clayton Metals works hard to understand and meet their specific needs. Customers come back because of the excellent service and quality of stainless, aluminum, copper and brass products. Clayton Metals, headquartered near Chicago, Illinois, became part of the Reliance family in 2007 and operates two additional locations near Los Angeles, California and Newark, New Jersey.

Continental Alloys & Services, Inc.

Continental Alloys & Services, Inc.

Continental Alloys & Services, Inc. was established in 1976 as a small supplier of steel to the oil and gas industry. By developing its network of relationships and broadening its product lines from oil country tubular goods (OCTG) to mechanical tubing and solid bar, Continental grew its business and service area to Canada, Mexico, the United Kingdom, Malaysia, Singapore, and the United Arab Emirates. Joining the Reliance family in 2011, Continental increased Reliance’s global reach, while at the same time lending Reliance's strength and reputation to Continental’s operations in North America. Continental’s mission remains: to be the global leader in materials management for the energy services industry, offering a complete range of products and value added services that meet or exceed customers’ demands.

Crest Steel Corporation

Crest Steel Corporation

Founded in 1963, Crest Steel Corporation is a major distributor of structural steel products – steel beam, shapes, bar, plate, sheet, steel coil, and more – to industries including shipbuilding, solar support structures and commercial fabrication. Crest offers a variety of value-added processing services, efficiently serving customers from locations in Cypress and Riverside, California and Phoenix, Arizona. Crest joined Reliance’s family of companies in early 2007. Among other new opportunities, the combination with Reliance expanded Crest’s access to inventory and geographic reach, providing a solid footing in the steel plate distribution business.

Delta Steel, Inc.

Delta Steel, Inc.

Founded in 1963, Delta Steel, Inc. has established a deep and diverse inventory, the best processing equipment in the industry and a dedicated, professional team. Experts at brokering partnerships with a diverse group of fabricators, OEMs, and other clients, Delta is a leading provider of steel and pre-production processing in the Southwest. Delta serves various industries domestically and abroad. Joining the Reliance family in 2008 increased Delta’s purchasing strength with steel mills and strong vendor relationships, further enabling Delta to provide the best products at the best prices to clients and customers.

Diamond Manufacturing Company

Diamond Manufacturing Company

Diamond Manufacturing Company has provided OEMs, job shops, and architectural firms with quality perforated metal, plastic, and other materials since 1915. Headquartered in Wyoming, Pennsylvania, with additional locations in Cedar Hill, Texas, Michigan City, Indiana and Charlotte, North Carolina, Diamond became a part of the Reliance family in 2010. With the ability to perforate more than 2000 patterns, produce tolerances tighter than industry standard, and offer sheet, coil, tube, fabricated, or finished product, Diamond has the versatility to meet the needs of all its customers. In 2012, Diamond acquired McKey Perforating Co., Inc. which added two locations in New Berlin, Wisconsin and Manchester, Tennessee. Its capabilities and distinct responsiveness have made Diamond North America's leading and largest perforator. Diamond Manufacturing has provided original equipment manufacturers (OEMs), job shops, and architectural firms with quality perforated metal, plastic, and other materials since 1915; it became a part of the Reliance family in October 2010. With the ability to perforate more than 2000 patterns, produce tolerances tighter than industry standard, and offer sheet, coil, tube, fabricated, or finished product, Diamond has the versatility to meet the needs of all its customers. Diamond’s experts work to ensure complete customer satisfaction: providing design assistance or delivery information, organizing a bar-coded inventory system, or delivering directly to a construction site. Its capabilities and distinct responsiveness have made Diamond North America's leading and largest perforator.

DuBose National Energy Services, Inc.

DuBose National Energy Services, Inc.

Founded in 1990, DuBose National Energy Services offers the largest, most diverse inventory of nuclear certified and safety-related materials and services in the United States. Over the years, DuBose has grown its fabrication capabilities to ensure quality and allowing the company to provide better solutions for its customers. DuBose Energy now operates in over 200,000 square feet in Clinton, North Carolina. Its affiliate company, DuBose National Energy Fasteners & Machined Parts, Inc. has highly skilled machinists and precision equipment on hand to support 24/7/365 global fabrication, supply, and distribution of metal and metal products to the nuclear industry. DuBose Fasteners was founded in 2010 and is headquartered in Cleveland, Ohio. Both companies were acquired by Reliance in March 2018.

Durrett Sheppard Steel Co.

Durrett Sheppard Steel Co.

Founded in 1963 and a Reliance family member since 1998, Durrett Sheppard Steel is a diversified metals processor and distributor based in Baltimore, MD, whose processing capabilities include oxy and plasma burning, sawing and shearing from a 202,000 square-foot facility. Durrett Sheppard outsources a variety of other metal products and related processing requirements and delivers metal products to customers throughout Maryland, Delaware, Pennsylvania, Virginia, West Virginia and Washington, D.C. Durrett Sheppard prides itself in quality, service and dedication to serving its customers' needs.

Earle M. Jorgensen Company

Earle M. Jorgensen Company

Earle M. Jorgensen Company was founded as Jorgensen Steel and Aluminum in 1921 and quickly rose to be one of the country's largest stockers of bar, sheet, plate, tubing, and structural steel and aluminum, and a leading supplier to manufacturing companies across North America. A broad network of facilities, superior inventories, processing capabilities, and world-class technology enables them to provide unsurpassed service to their customers. Acquired by Reliance in 2006, EMJ’s 30+ U.S. locations and presence in Canada and Malaysia represent one of Reliance’s largest subsidiaries.

Encore Metals

Encore Metals

With locations in Vancouver, Edmonton, Calgary, and Winnipeg, Encore Metals – supplies specialist high grade steel and metals. These include carbon and alloy steels, stainless steels, nickel alloys, iron bar, aluminum and bronze. Encore’s processing capabilities include bar sawing, trepanning, stainless plate profiling and plate sawing. With roots dating back to 1892, Encore Metals has not only seen but been a major player in the growth and development of the metals service center industry in Canada. The company strives to live by its mission statement to “provide superior service and the highest quality products to our customers while maintaining a safe work environment for all employees, contractors, and visitors.” Encore Metals joined the Reliance family of companies in 2007.

FastMetals

FastMetals, Inc.

Launched in February 2020, FastMetals is an e-commerce business created in response to the growing demand for digital purchasing solutions from metalworkers of all backgrounds. FastMetals tailors to smaller, specialized end-users including artists, fabricators, machine shops, hobbyists, and do-it-yourself practitioners. Customers can choose from standard shapes and sizes or select specific dimensions to satisfy unique project requirements. FastMetals provides instant pricing, same-day shipping, no minimum order quantity, and direct fulfillment to the individual customer. It is yet another channel through which customers can experience Reliance’s unique, customer-focused service.

Feralloy Corporation

Feralloy Corporation

One of the country’s largest high-volume steel processing companies, Feralloy Corporation delivers quality processed flat rolled steel. From its Chicago base, Feralloy operates a network of five coil processing plants and seven joint venture facilities throughout the U.S. and Mexico that provide value-added processing of hot rolled, pickled, cold rolled and coated sheet products to manufacturers and producers. Feralloy has almost 60 years of industry experience and joined Reliance’s family of companies in 2008.

Fox Metals and Alloys, Inc.

Fox Metals and Alloys, Inc.

Started in Houston in 1985, Fox Metals & Alloys specializes in alloy, carbon, and stainless steel bar and plate products. Its processing capabilities include saw cutting, plate burning, and testing. Fox supplies OEMs and machine shops that support the oil and gas and petrochemical industries, in which timeliness is critical. The company prides itself on its customer-centered practices: understanding each customer’s unique needs and delivering efficient and cost-effective solutions. With its fleet of eight delivery trucks, its strong reputation for delivering custom products and solutions, and unparalleled quality and customer service, Fox a trusted supplier serving serve Texas, Oklahoma, and Louisiana. Fox Metals joined the Reliance Family of Companies in December 2014.

Fry Steel Company

Fry Steel Company

Founded in 1948 as the Allen-Fry Steel Company, the company’s name changed when John Fry bought out his business partner in 1971. Today, Fry Steel is an established and ISO 9001/AS9120 certified general line and long bar distributor. The company operates from an 180,000 square foot warehouse located in Santa Fe Springs, California. Fry Steel performs cutting services on its diverse product assortment of over 8,000 types and conditions of long bar product and provides next business day delivery on in-stock items through its proprietary fleet of trucks. The company prides itself as a “source of service” for all grades of bar metal. Fry Steel joined the Reliance Family of Companies on December 31, 2019.

Infra-Metals Co.

Infra-Metals Co.

Infra-Metals has built strong relationships with major vendors in the U.S. and globally. Beyond stock, Infra-Metals offers a broad array of services, tailored to meet local customers’ specific needs. Each Infra-Metals location has a commitment to saw cutting, beam splitting, cambering, punching, plate burning, and prompt delivery. Infra-Metals has been a Reliance subsidiary since 2008. Its deep and unique inventory often carries sections unavailable elsewhere. Constantly in the market purchasing steel has built strong relationships with major vendors in the U.S. and globally. Beyond stock, Infra-Metals offers a broad array of services, tailored to meet local customers’ specific needs. Each Infra-Metals location has a commitment to: saw cutting, beam splitting, cambering, punching, plate burning, and prompt delivery. As a Reliance subsidiary since August 2008, Infra-Metals has secure financing and a strengthened commitment to steel distribution and processing.

The KMS Companies

The KMS Companies

KMS Fab, LLC was founded in 1954 in Luzerne, Pennsylvania, with just two employees. KMS South, Inc. was founded in 1987 in West Columbia, South Carolina. The KMS Companies now employ a team of over 200 employees and net over 250,000 square feet in plants and factories. KMS’ specialty is precision sheet metal fabrication of products ranging from prototypes to large production runs. The KMS Companies also produce zinc plating, welded mechanical and electro-mechanical assemblies, and stainless steel parts. They offer a wide variety of metals and fabrication methods, including laser cutting, stamping, turret punching, automation, machining, powder coating, e-coating, silk screening, anodizing, and welding. KMS joined the Reliance Family of Companies in 2018.

Liebovich Bros., Inc.

Liebovich Bros., Inc.

Liebovich Bros., Inc.'s state-of-the-art facilities in Rockford, Illinois, are fully equipped to provide high-definition plasma cutting, precision plate and sheet shearing, flame cutting, grinding, stress relieving and saw cutting, among other services. Their inventory of aluminum, hot and cold rolled steel, stainless steel, brass, copper and alloys is among the Midwest's largest. Whether customers need a single piece or 1,000 pieces cut, Liebovich is able to fill the order quickly and efficiently. The company continues investing in the latest technology and equipment and strives to improve its products and services. Liebovich has been part of the Reliance family since 1999. It also operates Liebovich Steel & Aluminum Company, Good Metals Company, Hagerty Steel & Aluminum Company, and Custom Fab Company.

MetalCenter Inc.

MetalCenter

MetalCenter is a metals processor and distributor of commercial aluminum, aerospace aluminum, and stainless steel. This Reliance division traces its roots back to 1980, when the non-ferrous operations of Reliance Steel Company were relocated from Los Angeles to Cerritos, California and renamed Reliance MetalCenter. In 1986, the name was shortened to MetalCenter, and in 1990 the company moved to a state-of-the-art 142,000 square-foot facility in Santa Fe Springs, California, absorbing the operations of Eureka Metals when it was acquired by Reliance in 1993. Today, MetalCenter is widely recognized as a leader in aluminum and stainless, whose diverse product range, processing capabilities, and superior quality are unmatched in this segment of the metals industry.

View more information about MetalCenter

MetalCenter is a metals processor and distributor of commercial aluminum, aerospace aluminum and stainless steel located in the Southern California area. MetalCenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), one of the largest metals service center companies in the United States, and is an ISO 9001:2015 (view document) certified facility.

MetalCenter – History

The roots of MetalCenter were founded in 1980, when the non-ferrous operations of the Reliance Steel Company were moved to Cerritos, California and called Reliance MetalCenter. At the time, the 75,000 square foot facility had just one leveling line and one shear. The division specialized in just commercial aluminum and stainless flat-rolled products. In 1981 Reliance Steel & Aluminum Co. made two acquisitions that were combined with Reliance MetalCenter – Cerritos. The first was West Metals in 1981 and the second was Circle Metals in 1983. The combination of these companies gave Reliance MetalCenter – Cerritos additional depth, increased the customer base and added leveling capacity, as well as an entry into the slitting business. By 1984 sales for Reliance MetalCenter – Cerritos had doubled. In 1986 the company name changed to MetalCenter and in 1990 the division moved to a state-of-the-art 142,000 square foot facility in Santa Fe Springs, California. Then in 1993 Eureka Metals was acquired which specialized in aerospace aluminum products.

MetalCenter – Today

Today, this division is widely recognized as a leader in the aluminum and stainless product arena. Its diverse product depth, processing capabilities and superior quality are unmatched in this metals segment of the industry.

Sales Terms and Conditions
Purchase Terms and Conditions

Metals USA, Inc.

Metals USA

Metals USA, Inc. is a national network of over 45 metals service centers providing processed carbon steel, stainless steel, aluminum, red metals, and manufactured metal components to a wide range of industries including land and marine transportation, energy, aerospace, defense, appliance manufacturing, furniture, commercial construction, machinery and equipment, and residential remodeling. Metals USA performs such value-added processes as cutting, sawing, punching, shot blasting, surface grinding, and drilling for delivery to customers in the U.S., Canada, and Mexico. In early 2013, Metals USA joined the Reliance family of companies as a wholly-owned subsidiary and Reliance’s largest acquisition to date.

Metalweb Limited

Metalweb Limited

Metalweb Limited, established in 2001, provides comprehensive metals services to hi-tech industries, carrying out four key roles in the supply chain that help its customers perform more cost-effectively: holding stock; carrying out first stage processing; having no minimum quantity; and maintaining traceability. Metalweb– headquartered in Birmingham, with additional locations in London, Manchester, and Oxford, England – stocks one of the largest ranges of aluminum products in all alloys, including plate, sheet, bar, tube and other extruded products. Fully-trained technicians operate specialist plate saws, bar saws, a large bed waterjet cutter, and other precision processing equipment. Metalweb became a part of Reliance’s family of companies in 2007.

National Specialty Alloys, Inc.

National Specialty Alloys, Inc.

Since 1985, National Specialty Alloys, Inc. has been the supplier of choice of premium stainless steel, nickel, high temperature and specialty alloy bars and other shapes. With its experience, range of capabilities, accurate processing, same-day shipping, and much more, NSA is proud to be a single-source solution. Four strategic warehouse locations in Texas, California, Georgia and Oklahoma serve both domestic and international markets, with inventory, tracking, and expediting done electronically, in real time. This saves customers’ time, space, and money. With their in-depth product knowledge and extensive cross-training, the NSA sales and support teams are motivated to deliver fast, accurate information. Final inspection of every order and same-day shipping complete their customer commitment. NSA joined the Reliance family in 2012.

Northern Illinois Steel Supply Company

Northern Illinois Steel Supply Company

Northern Illinois Steel, located in Channahon, Illinois, has been serving the needs of Illinois- and Indiana-based customers since 1961. NIS is a complete metalworks fabricating company, producing parts and products in aluminum, brass, copper, and stainless steel products in all grades, shapes, and sizes. The company’s 80,000 square foot warehouse and fabrication facilities are fully stocked with thousands of tons of plate, sheet, structural, bars, tubing, grating, and more. State-of-the-art processing equipment and a computerized inventory system, combined with skilled, knowledgeable, and dedicated staff – including drivers to operate a large fleet of delivery vehicles – mean that NIS can safely and efficiently process orders and offer “just in time” delivery, oftentimes on the same or the next day. NIS became a part of Reliance’s Family of Companies in August 2014.

Pacific Metal Company

Pacific Metal Company

Since 1876, with a firm belief that solid relationships and a strong commitment to quality and service are the backbone of good business, Pacific Metal Company has always put customers first. Headquartered in Tualatin, Oregon, with five additional locations in Seattle and Spokane, Washington; Boise, Idaho; Eugene, Oregon; and Billings, Montana, Pacific Metal serves the west, from Alaska to California’s Sacramento Valley to the eastern plains of Montana and Wyoming. From a diverse standard stock list to customer-specific inventories, customized just-in-time programs, and pre-production processing, Pacific Metal has worked hard to form mutually profitable business partnerships with all of its customers. Pacific Metal became part of the Reliance family in 2002. Its 135+ year history continues to be one of growth and adaptation to changing customer needs.

PDM Steel Service Centers, Inc.

PDM Steel Service Centers, Inc.

PDM Steel Service Centers, Inc. began in 1954 with four service centers – in Fresno, Sacramento, San Jose, and Stockton, California – providing outstanding metal processing and delivery throughout Central and Northern California. By improving existing centers, building new ones, and continuing to expand into new areas, the company grew to nine locations with corporate headquarters in Stockton, California. PDM now serves the Southwest desert region of the United States into southwestern Canada and Alaska. Every PDM location has shears, automatic saws, and shape burning equipment, and its own modern fleet of trucks. Some centers also offer plasma cutting, computer aided design, and CNC. PDM’s range of services and reputation for excellent customer service made it a good fit for Reliance, who acquired PDM in 2001.

Phoenix Metals Company

Phoenix Metals Company

Founded in 1979, Phoenix Metals Company specializes in flat-rolled aluminum and stainless steel and coated carbon steel product. Phoenix creates a bridge between primary metal producers and consumers which enables them to custom fit orders, making it a one-stop depot for all its customers’ metal service needs. Phoenix Metals uses its state-of-the-art processing equipment to provide cut-to-length/blanking, slitting, shearing, plasma burning and polishing services. Headquartered near Atlanta, Georgia, Phoenix has grown to 13 locations in Alabama, Arkansas, Florida, Georgia, Indiana, Kansas, Louisiana, Missouri, North Carolina, Ohio, Pennsylvania, Tennessee and Virginia.

Precision Flamecutting and Steel, Inc.

Precision Flamecutting and Steel, Inc.

In business since 1975 and acquired by Reliance in 2008, Precision Flamecutting and Steel, Inc. is an industry leader in flame cutting and plasma cutting carbon plate, alloy plate, and HSLA steel plate – so much so that competitors recommend Precision Flamecutting for especially difficult jobs. Beveling, machining, rolling, forming (including concentric and eccentric cones), heat treating, sandblasting, coating, grinding, and other miscellaneous machining and fabricating services are also offered. Precision Flamecutting’s commitment to its customers is to provide parts for their purchase requirements, on time and according to industry specifications. Precision Flamecutting’s sales, drafting and shop personnel are on call 24 hours a day, 365 days a year to serve customers in any and every situation.

Precision Strip, Inc.

Precision Strip, Inc.

Precision Strip, Inc. was founded in 1977 by five partners operating a used slitting line in Minster, Ohio. It is now one of the world's leading processors of rolled steel, aluminum, and copper, with almost 1,200 associates, and 12 facilities – located throughout Ohio, Indiana, Kentucky, Alabama, and Michigan. By providing one of the most diverse arrays of services in the industry, continually improving technologically, and partnering with customers, Precision Strip has earned a reputation for being the world’s premier toll processor. A fleet of approximately 225 tractor-trailers provides just-in-time delivery and ensures seamless service – from storage to processing to delivery – to the automotive, appliance, industrial products, and beverage can industries. Precision Strip has been a part of the Reliance family since 2003.

Reliance Aerospace Solutions

Reliance Aerospace Solutions

Reliance Aerospace Solutions (RAS) was established in 2007 to offer a single point of contact to distribute various aerospace grade products to contract customers and their sub-tier suppliers. Rather than maintaining or controlling any physical inventory, RAS fills orders using approved Reliance subsidiaries and divisions. The objective of RAS is to provide customers with the most comprehensive mix of products available in the industry, on-time and defect-free.

Reliance Metalcenter
Reliance Metalcenter

Reliance Metalcenter

Reliance’s seven Metalcenter divisions are strategically located in Colorado Springs, CO; Arlington (Dallas-Ft. Worth) and San Antonio, TX; National City (San Diego) and Union City (Northern California), CA; Phoenix, AZ; and Salt Lake City, UT. Each independently-operating service center has an established reputation for satisfying customer demand for a wide range of metals products and value-added processing using state-of-the art equipment and shipped for just-in-time delivery. Metalcenters cater to diverse customers including general fabricators, truck trailer manufacturers, precision sheet metal shops, kitchen equipment and structural steel fabricators, sports equipment manufacturers, and the telecommunications, energy, computer chip-making, and aerospace industries. All Metalcenters strive for the highest level of customer satisfaction and quality, drawing on Reliance’s resources to invest in their operations and improve services as their local markets dictate.

View more information about Reliance Metalcenter

Arlington

3320 E. Randol Mill Rd., Arlington, TX, 76011 – Tel: 817-640-7222

[email protected]

Reliance Metalcenter is a diversified metals processor and distributor based in Arlington, Texas. Reliance Metalcenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States and is an ISO 9001:2015 (view document) certified facility.

Strategically located in the center of the Dallas-Ft Worth, Texas area, Reliance Metalcenter’s 75,000 square-foot facility is well equipped to service the metal requirements of a diverse customer base. Those customers include general fabricators, truck trailer manufacturers, precision sheet metal shops, sign manufactures, kitchen equipment fabricators, display rack manufacturers, structural steel fabricators, sports equipment manufacturers, machine shops, the telecommunications industry, and the energy industry, to name a few. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

San Antonio

5027 Space Center, San Antonio, TX, 78218-5729 – Tel: 210-661-2301

[email protected]

Reliance Metalcenter is a diversified metals processor and distributor located in San Antonio, Texas. Reliance Metalcenter is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States, and is an ISO 9001:2015 (view document) certified facility.

Reliance Metalcenter has been serving the metal products needs of the South Texas and Mexico markets since 1971. Our 73,000 square-foot facility has the capability to provide our customers, in various industries, with value-added metal products processed according to customer specifications. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

Click here to pay your bill

Colorado Spring, CO

3855 Silica Drive, Colorado Springs, CO, 80910 – Tel: 719-390-4911

View Website

[email protected]

National City, CA

2100 Cleveland, National City, CA, 91950-6487 – Tel: 619-263-2141

View Website

[email protected]

Phoenix, AZ

301 South 26th St., Phoenix, AZ, 85034-2688 – Tel: 602-275-4471

View Website

[email protected]

Salt Lake City, UT

4355 West 1730 South, Salt Lake City, UT, 84104 – Tel: 801-974-5300

View Website

[email protected]

Union City, CA

33201 Western Avenue, Union City, CA, 94587-2200 – Tel: 510-476-4400

View Website

[email protected]

Reliance Steel Company
Reliance Steel Company

Reliance Steel Company

Reliance Steel Company is New Mexico's largest full-line carbon steel processor and distributor, supplying value-added metals products to customers throughout New Mexico, Southern Colorado and El Paso, Texas. This Reliance division is renowned for its quality "first step" processing capabilities. Reliance Steel Company – Los Angeles still operates on the plot of land purchased in 1952 that was shared with Reliance headquarters, until the corporate office moved to Downtown Los Angeles. Reliance Steel Company now operates from a 275,000 square-foot facility with the capability to process value-added carbon steel products for a diverse customer base throughout Southern California. Reliance Steel Company – Los Angeles prides itself on quality, service and a dedication to serving its customers' needs.

View more information about Reliance Steel Company

Albuquerque

1801 Eighth Street N.W., Albuquerque, NM, 87102 – Tel: 505-247-1441

[email protected]

Reliance Steel Company is a diversified metals processor and distributor based in Albuquerque, New Mexico and is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States, and is an ISO 9001:2015 (view document) certified facility.

This division is New Mexico’s largest full-line carbon steel processor and distributor that supply value-added metal products to customers throughout New Mexico, Southern Colorado and El Paso, Texas. The division is renown for its qualitiy “first step” processing capabilities. These services are provided in an effort to assist our customers in reducing costs.

We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

Click here to pay your bill

Los Angeles

2537 E. 27th Street, Los Angeles, CA, 90058 – Tel: 323-583-6111

[email protected]

Reliance Steel Company is a diversified metals processor and distributor based in Los Angeles, California. Reliance Steel Company is a division of Reliance Steel & Aluminum Co. (NYSE:RS), the largest metals service center company in the United States.

Our 275,000 square-foot facility has the capability for processing value-added carbon steel products to our diverse customer base throughout Southern California. We pride ourselves in our quality, service and dedication to serving our customers’ needs.

          

The Richardson Trident Company, LLC

The Richardson Trident Company, LLC

The Trident Company was founded in October 1962. Over the past half-century, the business has grown into a multi-faceted metals service center, servicing national customers from its locations in Richardson, Odessa, and Houston, Texas; Tulsa, Oklahoma; and Kansas City, Missouri. Trident distributes non-ferrous metals including aluminum, stainless, as well as specialty performance and corrosion-resistant products. Its processing services include boring, honing, turning, cutting, slitting, sheeting, shearing, and saw operations. Trident was acquired by Reliance in 2014, when it was a subsidiary of Metals USA.

Service Steel Aerospace Corp.

Service Steel Aerospace Corp.

Service Steel Aerospace Corp. was founded in 1976 and is one of the largest aerospace steel and titanium distributors in the world. It stocks a vast selection of aerospace quality steel and titanium, maraging steel and invar steel products for the aerospace and other critical application industries. SSA’s large inventory and mill relationships enable it to offer immediate delivery of hard-to-find products. In addition to providing stock, SSA performs a wide array of value-added processing including forging, custom in-house cutting, heat treating, ultrasonic testing, trepanning, and turning/grinding. Strategic locations in Fife, Washington; Massillon, Ohio; Pico Rivera, California; and Bristol, Connecticut and a team of experienced staff, quickly fill orders and release them for worldwide shipping. SSA has been a part of the Reliance family since 1997. It acquired Dynamic Metals International, LLC located in Bristol, Connecticut, in 2008.

Siskin Steel & Supply Co., Inc.

Siskin Steel & Supply Co., Inc.

In 1900, Robert Siskin and a friend opened a scrap metal business with $6.00 and a rented lot in Chattanooga, Tennessee. Over the course of a century the business has grown to eight locations across Tennessee, Alabama, Georgia, Kentucky and South Carolina, serving most of the southeastern United States. Two partners have increased to hundreds of skilled employees, and the product line has grown beyond standard warehouse carbon steel, stainless, aluminum and other non-ferrous metals to specialty and hard-to-find items. In 1996, Siskin was acquired by Reliance. Subsequent Reliance acquisitions – Georgia Steel Supply Co., East Tennessee Steel Supply Co., Industrial Metal & Surplus, Inc., and Athens Steel, Inc. – were integrated into the Siskin Steel group.

Sugar Steel Corporation

Sugar Steel Corporation

Sugar Steel Corporation, headquartered near Chicago, Illinois has been in business since 1966, meeting customers’ metal needs while providing exceptional service. Sugar Steel prides itself in establishing long lasting customer partnerships built on its ability to save customers both time and money. Beyond supplying stock material, Sugar Steel provides first-stage processing. This service has been the key to the company’s continued growth and success since the very beginning. It has been a part of the Reliance family of companies since 2008.

Team Tube

Team Tube

Team Tube specializes in mechanical steel tubing – including microhoned ID tubing – specifically designed to serve hydraulic and general machine shops. Since 1977, Team Tube’s inventories have grown to include chrome-moly alloy tubing, chrome plated bars, ductile iron bars, Zincaloy tubing and bar, and much more. Customers have also increased to include the original equipment manufacturers (OEM) industry. Team Tube services Canada wide from its 5 locations in Vancouver, Edmonton, Calgary, Toronto and Montreal. Team Tube has been a member of the Reliance family since 2007.

Tube Service Co.

Tube Service Co.

Founded more than three decades ago, Tube Service Co., headquartered in Los Angeles, California, introduced the nation’s first high-tech computerized storage and retrieval systems, and continues to provide tubular laser processing services and distribution throughout the western United States. Tube Service Co. leads the way with three state-of-the-art tube laser processing centers which specialize in cutting stainless, aluminum and carbon tubular shapes. The company distributes a full array of ferrous and non-ferrous tubular products, laser tube processing, cutting to length tube processing, and marketing seamless and drawn over mandrel tubing (aluminum, stainless, carbon, and alloy). Six service centers in California, Arizona, Colorado and Oregon, excellent relationships with most major tube and pipe mills around the world, and a knowledgeable and experienced sales staff makes Tube Service Co. the first choice to meet customers’ tubular product needs.

Tubular Steel, Inc.

Tubular Steel, Inc.

Tubular Steel, Inc. (TSI) was founded in 1953 in St. Louis, Missouri. Over the years, TSI has grown its business in terms of products, services, locations, and employees. Today, the company consists of seven service centers across the United States, which stock over 60,000 tons and ship over 2 million custom-cut lengths of pipe, tubing, and bar products annually. In addition to being a leading distributor and processor of carbon, alloy, and stainless steel products, TSI and its team of over 350 employees is dedicated to helping their customers achieve savings through their innovative solutions. The company, along with its subsidiary, Metalcraft Enterprises, Inc., was acquired by Reliance in January 2016.

Valex Corp.

Valex Corp.

Valex Corp. started in 1976 and became part of the Reliance family in 1986. Headquartered in Ventura, California, Valex is the world's leading manufacturer and distributor of ultra-high purity (UHP) products used in gas delivery systems. Its products have been long established as components of choice by semiconductor producers and manufacturers of semiconductor equipment. Ongoing research and development, as well as plant improvements, continually enhance its position as a market leader. Valex Corp. products have acquired a distinguished worldwide reputation by fulfilling customers' requirements for excellent reliability and quality. Valex has two additional locations near Seoul, South Korea and Shanghai, People’s Republic of China.

Viking Materials, Inc.

Viking Materials, Inc.

Viking Materials, Inc. was founded in Minneapolis, Minnesota in 1972. Viking developed into a major metals supplier to the Upper Midwest. It now has an additional location near Chicago, Illinois. In addition to providing the best products available, Viking Materials learned early on that excellent service and creating solutions were the keys to success. This philosophy of evolving with customers’ needs helps the company focus on its vision of being the market’s first choice for metal products. In 2001, Viking Materials joined Reliance’s family of companies.

Yarde Metals, Inc.

Yarde Metals, Inc.

Yarde Metals, Inc. was founded in 1976 in Bristol, Connecticut. Over the years this family company grew to 10 service centers along the East Coast and into the Midwest, serving markets across the United States, Europe and Asia. In 2003, headquarters moved to a completely renovated state-of-the-art 500,000 square-foot facility in Southington, Connecticut. The company joined the Reliance family in 2006 and specializes in aluminum, stainless, carbon steel, brass and copper in a wide range of standard, unique and hard-to-find sizes. It also offers a variety of modern processing services and ensures quick turnarounds and fast deliveries. Yarde’s customers are supported by a team of 600 highly motivated associates.